FuelTech NanoPro Wideband Air/Fuel Ratio Gauge with 15-ft Bosch Harness and 4.9 O2 Sensor

• Extended wideband reading scale with advanced new hardware that allows fast and precise readings.
• 2.0” touchscreen color LCD.
• “Second display gauge” function that allows display valuable information like Oil Pressure, Fuel Pressure, Boost, RPM, Engine Temperature and
  much more coming from the FTCAN 2.0, with the possibility of configuring up to 5 custom screens.

• “Switch Panel” function, touchscreen buttons or switches via CAN bus to the PowerFT ECU.
• 3 configurable O2 sensor heating modes: Normal, Fast and Current Limited, as well with auto startup, activated by engine RPM or temperature.
• Advanced heater diagnostics in the PowerFT ECU datalogger.
• Waterproof (IP67 certified*)
  *with product harness connected

• Waterproof (IP67 certified*)
• 2” color display with resistive touchscreen
• Compatible with 5 different models of O2 sensors: BOSCH 4.2 / 4.9 / 5.2 / NTK ZFAS-U2 (laboratory) and NTK ZFAS-A2 (PN: UAR0004)
• Different fuels AFR or lambda display unit options **
  • Lambda (0.21 - 9.99)
  • AFR Methanol (1.35 - 64.6)
  • AFR Gasoline (3.09 - 146.6)
  • AFR Ethanol (1.89 – 89.9)
• CAN communication with Power FT ECU’s:
  • “Second display gauge” function that allows display valuable information like Oil Pressure, Fuel Pressure, Boost, RPM, Engine Temperature and much more coming from the FTCAN 2.0, with the possibility of configuring up to 5 custom screens
  • “Switch Panel” function, touchscreen buttons or switches via CAN bus to the PowerFT ECU.
• 3 configurable O2 sensor heating modes: Normal, Fast and Current Limited, as well activated by engine RPM or temperature
• Advanced heater diagnostics in the PowerFT ECU datalogger
• 0-5V analog output for connection with any data acquisition or programmable injection system.

- Maximum power supply voltage: 20V

- Automotive connector

** The reading range can reach values slightly lower or higher than 0.21 λ, depending on the manufacturing characteristics of the sensor.

Dimensions

• Dimensions: 2.64” x 1.83” x 1.48” (in)

Weight

• Module: 1.84 oz
• Product: 3.99 oz

Contents of packaging

• NanoPRO module
• Instructions guide
• 4 screws for fixation
• 15ft Bosch LSU 4.9 unterminated harness
• Bosch LSU 4.9 sensor